Polarization voltage: Difference between revisions

Latest revision as of 09:20, 5 April 2022

Polarization voltage

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.

Abbreviation: U

Reference: MiPNet22.11 O2k-FluoRespirometer manual

MitoPedia O2k and high-resolution respirometry: O2k hardware, DatLab

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

DatLab

The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet22.11 O2k-FluoRespirometer manual). The default value is 800 mV.

@@ Line 1: / Line 1: @@
-{{MitoPedia
+{{Technical support}}
+{{MitoPedia without banner
 |abbr=''U''
 |description=A '''polarization voltage''' of 600 mV to 800 mV is applied between anode and cathode of the [[polarographic oxygen sensor]], resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
+|info=[[MiPNet22.11 O2k-FluoRespirometer manual]]
 }}
-{{MitoPedia concepts}}
-{{MitoPedia methods}}
 {{MitoPedia O2k and high-resolution respirometry
 |mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab
 }}
-{{MitoPedia topics}}
+{{Technical support integrated}}
 == DatLab ==
-The polarization voltage is set in [[DatLab]] in the "Oxygraph-2k" \ "O2k-Control" window ([[MiPNet19.18A O2k-Start]]). The default value is 800 mV.
+:::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet22.11 O2k-FluoRespirometer manual]]). The default value is 800 mV.
-[[Category:Technical service]]