POS-Holder: Difference between revisions
From Bioblast
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
Two units of this item are standard components mounted on the [[O2k-Main Unit]]. | Two units of this item are standard components mounted on the [[O2k-Main Unit]]. | ||
|product id=22300-01 | |product id=22300-01 | ||
|product type=OroboPOS, O2k- | |product type=OroboPOS, O2k-FluoRespirometer, Startup-O2k | ||
|info=[[MiPNet12.06 O2k-Start]] | |info=[[MiPNet12.06 O2k-Start]] | ||
|product image=[[Image:Pos_holder.JPG|right|180px]] | |product image=[[Image:Pos_holder.JPG|right|180px]] | ||
}} | }} |
Revision as of 15:34, 10 August 2017
POS-Holder
Description | The OroboPOS-Holder (POS-Holder), made from blue POM, is screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber.
Two units of this item are standard components mounted on the O2k-Main Unit. |
---|---|
Product ID | 22300-01 |
Type | OroboPOS, O2k-FluoRespirometer, Startup-O2k |
Link | MiPNet12.06 O2k-Start |
Image |