O2k-Chamber Holder: Difference between revisions
From Bioblast
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* Two O2k-Chamber Holders are included in the [[Oxygraph-2k|O2k-Core]], mounted on the [[O2k-Main Unit]]. | * Two O2k-Chamber Holders are included in the [[Oxygraph-2k|O2k-Core]], mounted on the [[O2k-Main Unit]]. | ||
|product id=23400-24 | |product id=23400-24 | ||
|product type=O2k- | |product type=O2k-Main Accessory | ||
|product image=[[File:Chamber holder PVDF Stopper.jpg|180px|link=]] | |product image=[[File:Chamber holder PVDF Stopper.jpg|180px|link=]] | ||
}} | }} | ||
*The '''23300-24''' O2k-Chamber Holder (with Fixation Ring (23310-24), [[Viton 18x2 mm O-ring]] and [[V-ring 30-35-4.5 mm]]) for Titanium stoppers cannot be used with PVDF or PEEK stoppers. | *The '''23300-24''' O2k-Chamber Holder (with Fixation Ring (23310-24), [[Viton 18x2 mm O-ring]] and [[V-ring 30-35-4.5 mm]]) for Titanium stoppers cannot be used with PVDF or PEEK stoppers. | ||
Revision as of 00:21, 10 January 2012
O2k-Chamber Holder
| Description | O2k-Chamber Holder (blue POM) for PVDF or PEEK stoppers, with O-ring\Viton\18x2 mm (#23420-24) and V-ring\30-35-4.5 mm (#23430-24). After the O2k-Chamber is inserted into the copper block, the O2k-Chamber Holder is srewed on top of the chamber into the copper block to hold the chamber into a tight vertical position (O-ring) and prevent liquid to flow from the stainless steel housing into the space outside of the chamber (V-ring).
|
|---|---|
| Product ID | 23400-24 |
| Type | O2k-Main Accessory"O2k-Main Accessory" is not in the list (O2k, O2k-Module, O2k-Core, O2k-Fluorometer, O2k-Main Unit, O2k-Assembly Kit, OroboPOS, OroboPOS-Service Kit, ISS, TIP2k, ...) of allowed values for the "Product type" property. |
| Link | |
| Image | 
|
- The 23300-24 O2k-Chamber Holder (with Fixation Ring (23310-24), Viton 18x2 mm O-ring and V-ring 30-35-4.5 mm) for Titanium stoppers cannot be used with PVDF or PEEK stoppers.
