O2k-NO Amp-Module
Description | O2k-NO Amp-Module: 2 black PEEK stoppers for NO applications; 1 additional inlet (2.3 mm) for 2 mm shaft NO sensor; central titration port; conical bottom; with Volume-Calibration Rings (A and B); with 8 spare O-rings (O-ring\Viton\12x1 mm; two boxes). The NO sensor is not included. |
---|---|
Product ID | 12500-02 |
Type | O2k, O2k-Module, MultiSensor, O2k-NO Amp-Module, Stopper, Catalogue |
Link | O2k-MultiSensor System with Amperometric Sensors (NO, H2S, H2O2) |
Image |
Amp-Sensors
- The NO sensor (not included) is available from other companies, while we are in the process of development of improved high-resolution sensors.
- The O2k-Core (Series E upwards) is fully equipped with the necessary electronics to record signals form additional amperometric sensors. O2k-MultiSensor options of O2k Series A to D are explained in the O2k-Manual [2].
- Amperometric Electrodes form WPI: The amperometric plug of the O2k fully matches the WPI 2 mm sensor series for measuring NO (ISO-NOP), H2O2 (ISO-HPO-2) and H2S (ISO-H2S-2). The 2 mm NO and H2O2 sensors fit the O2k stopper described here. The H2S sensor should also fit the stopper but this has not yet been tested by OROBOROS INSTRUMENTS. Please not that OROBOROS INSTRUMENTS does not give any statements about the suitability of these electrodes for any particular application or even their quality. Electrodes have to be ordered directly from WPI.
References
- Aguirre E, Rodríguez-Juárez F, Bellelli A, Gnaiger E, Cadenas S (2010) Kinetic model of the inhibition of respiration by endogenous nitric oxide in intact cells. Biochim Biophys Acta 1797: 557-565.
- O2k-MultiSensor System with Amperometric Sensors (NO, H2S, H2O2). MiPNet15.05.
Discussion: Talk:O2k-NO Amp-Module