O2k-NO Amp-Module

O2k-NO Amp-Module

Description	O2k-NO Amp-Module: 2 black PEEK stoppers for potentiometric O2k-MultiSensor application (NO, H2S, H2O2); 1 additional hole (2.3 mm); central titration port; conical bottom; with Volume-Calibration Rings (A and B); with 8 spare O-rings (O-ring\Viton\12x1 mm; two boxes). The NO sensor is not included.
Product ID	12500-02
Type	O2k, O2k-Module, MultiSensor, O2k-NO Amp-Module, Stopper, Catalogue
Link	O2k-MultiSensor System with Amperometric Sensors (NO, H2S, H2O2)
Image

Amp-Sensors

We are currently in the process of developing improved high-resolution sensors. The NO Sensor is therefore not included in the purchase of this module. Sensors are available from the company World Precision Instruments (WPI) [1]. OROBOROS INSTRUMENTS Corp. provides this information without comment or liability with regards to the material quality, or the suitability of these sensors for any particular application.

The O2k-Core (Series E upwards) is fully equipped with the necessary electronics to record signals from additional amperometric sensors. O2k-Multisensor options of O2k Series A to D are explained in the O2k-Manual ([2]).

NO and other amperometric electrodes from WPI: The O2k amperometric plug fully matches the WPI 2 mm sensor series for measuring NO (ISO-NOP), H2O2 (ISO-HPO-2) and H2S (ISO-H2S-2). The three types of electrodes are equipped with membranes of different thicknesses. The O2k stopper as listed above in the description section was developed to accommodate all three types. For the time being, please let us know the type of electrode you want to use so that we can perform a check with our specism.

Electrodes have to be ordered from WPI!

Discussion: Talk:O2k-NO Amp-Module