Difference between revisions of "POS-Holder sV"

Revision as of 18:17, 10 November 2020

POS-Holder sV

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

OroboPOS-Holder sV (POS-Holder sV), made from black POM, to be screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber sV, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber sV with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder sV fixes the O2k-Chamber sV in an accurate rotational position by pressing against the angular cut of the glass chamber.

Reference: Product details and purchase information

Keywords

»Bioblast links: Chamber volume - >>>>>>> - Click on [Expand] or [Collapse] - >>>>>>>

» Volume

Units: Liter [L]; 1 L = 1 dm³ = 10^-3 m³; 1 mL = 1 cm³; 1 µL = 1 mm³

» O2k-chamber

» The experimental chamber in the instrumental O2k-Chamber

» O2k-Chamber sV

» Calibration of O2k-chamber volume

On chamber volume

» O2k-chamber

» Chamber volume

» MiPNet09.01 O2k-ParadigmShift

» Cell count and normalization in HRR

» Open chamber

» Closed chamber

Components of the experimental O2k-chambers

» Stirrer-Bar\white PVDF\15x6 mm

» Stirrer-Bar sV\white PVDF\11.5x6.2 mm

» Stopper\black PEEK\conical Shaft\central Port

» Stopper sV\black PEEK\conical Shaft\central Port

» O-ring\Viton\12.5x1 mm

» O-ring sV\Viton\9.5x1 mm

» Volume-Calibration Ring

» Volume-Calibration Ring sV

» Stopper-Spacer

» Cover-Slip\black

» O2k-Chamber Holder

» O2k-Chamber Holder sV

» OroboPOS-Holder

» OroboPOS-Holder sV

Maintencance

» O2k-cleaning and ISS

» Quality control: O2k-chamber test

MitoPedia O2k and high-resolution respirometry: O2k hardware, O2k-Open Support, O2k-Respirometry

@@ Line 1: / Line 1: @@
-{{Product
+{{Technical support}}
-|description='''OroboPOS-Holder sV''' (POS-Holder sV), made from black POM, to be screwed into the copper block of the [[O2k-Main Unit]], guiding the [[OroboPOS-Connector]] with the [[OroboPOS]] sensor head (POS) to the [[O2k-Chamber sV]], and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber sV with the [[OroboPOS-Seal Tip]]. In addition, the OroboPOS-Holder sV fixes the O2k-Chamber sV in an accurate rotational position by pressing against the angular cut of the glass chamber.
+__TOC__
+{{MitoPedia without banner
+|abbr=
+|description=[[File:32300-01.jpg|right|180px]]
+'''OroboPOS-Holder sV''' (POS-Holder sV), made from black POM, to be screwed into the copper block of the [[O2k-Main Unit]], guiding the [[OroboPOS-Connector]] with the [[OroboPOS]] sensor head (POS) to the [[O2k-Chamber sV]], and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber sV with the [[OroboPOS-Seal Tip]]. In addition, the OroboPOS-Holder sV fixes the O2k-Chamber sV in an accurate rotational position by pressing against the angular cut of the glass chamber.
+|info=[https://www.oroboros.at/index.php/product/orobopos-holder-sv/'''Product details and purchase information''']
-Two units of this item are standard components mounted on the [[O2k-Main Unit]].
+}}
-|product id=32300-01
+== Keywords ==
+{{Template:Keywords: Chamber volume}}
-|product type=O2k-sV-Module
+{{MitoPedia O2k and high-resolution respirometry
+|mitopedia O2k and high-resolution respirometry=O2k hardware, O2k-Open Support, O2k-Respirometry
-|info=  <!-- [[MiPNet22.11 O2k-FluoRespirometer manual|MiPNet22.11]] -->
-|product image=[[File:32300-01.jpg|right|180px]]
 }}
-== Keywords ==
-{{Template:Keywords: Chamber volume}}